BMW ICOM NEXT A + B + C KIT
ISIS ISID 
Rheingold ISTA / D and Next ISTA / P
 Standalone offline for ISIS Server

DIAGNOSTIC and PROGRAMMING
WORKSHOP MANUAL
and WIRING DIAGRAM
FULL SYSTEM

           

               


BMW ICOM NEXT  (
A2 PCB ) Description :


BMW ICOM NEXT
ICOM NEXT for
BMW is a High performance BMW interface that will take the place of BMW GT1, BMW OPPS , BMW OPS , BMW ICOM   
Integrated Communication Optical Module
BMW ICOM NEXT is a high performance BMW vehicle interface that will take the place of the older BMW GT1
(
Group Tester One ) , DIS-Plus diagnostic tools and will eventually replace
BMW OPS , BMW OPPS , BMW ICOM diagnostic tools.
It supports the new service processes ; It also is integrated to work with older model series. Diagnostic ONLY .

Adapters :
 
ICOM NEXT A -- OBD2 style diagnostic vehicle connector with communication protocols for MOST, K-CAN, D-CAN, KL15/30 detection, ignition failure status ,
battery status and TD signal for measurements .

ICOM NEXT B -- OBD style diagnostic vehicle connector with a high speed MOST extension for ICOM NEXT A and uses USB connection to the ICOM NEXT A
 

ICOM NEXT C -- Old style 20 pin diagnostic vehicle connector .
(in engine compartment) to
OBD2. Service interval reset and engine speed signal .


BMW 最新診斷設備 ICOM NEXT

BMW ICOM 產品描述:寶馬原廠檢測儀BMW ICOM NEXT BMW 新系統ISIS/診斷儀這是寶馬集團服務一項最新的計畫, 診斷,編碼和完整的系統專用于服務寶馬集團,將全面取代 GT1 / SSS / OPS / ICOM 診斷設備 以後所有寶馬
系列將通過 ISIS 系統主機 ISID 與 , ICOM
NEXT A, ICOM NEXT B 和 ICOM NEXT C
模組來診斷,編程,設碼等相關服務

1. ICOM NEXT A 介紹( OBD2 16PIN 介面

ICOM
NEXT A是基本組件。在物理方面,它一方面提供與車輛OBD II診斷介面連接的介面,另一方面提供自適應集成到修理廠網路所需的介面。通過一個高效的電腦核心,它作為協定轉換器負責測試儀和車輛控制單元之間的資料交換以及接通測量技術所需的信號處理。供電電壓經KL30通過車輛介面提供。
ICOM NEXT A的電氣運行規定有一個8V的最低電壓。
只有供電電壓超過最低極限值,才能確保穩定的功能

2. ICOM NEXT B 功能(MOST 介面

ICOM
NEXT B 是 ICOM NEXT A 的外部 MOST (多媒體傳輸系統)介面。它通過USB導線與 ICOM NEXT A連接。供電電壓通過 ICOM NEXTA經USB提供。只有當對 ICOM NEXT A供應最低8V的電壓時,ICOM NEXT B的電氣運行才準備就緒在車輛側 ICOM NEXT B通過標準的 MOST 介面連接。

3. ICOM NEXT C 功能(20PIN 介面

ICOM
NEXT C是一個智慧的介面轉換器,它使 OBD II 與 BMW 圓形插座相匹配。作為加長的輔助模組,它將
ICOM
NEXT A 與無 OBD II 介面的車輛連接。供電電壓在車輛側經KL30從圓形插座中提供。ICOM NEXT C 的
電氣運行規定有一個8V的最低電壓。KL30上的電壓在裝置內部傳送到 OBD II 上,並由此向 ICOM
NEXT A 供電。
只有當車輛的蓄電池電壓超過最低極限值, 才能確保兩個裝置穩定的交互作用。

 

Dealer Station Network



Standalone offline for ISIS Server

VMware
 SYSTEM





ISTA / P
(
Expert Mode ) Standalone Control Module Coding Programming
  (
專家模式獨立控制單元編程


B
MW
RHEINGOLD ISTA / D  NATIVE System

( Can FREE Installed on Any 64 Bit O.S., / Windows 7 / Windows 8 / Windows 10 )


Hardware Package

BMW ICOM NEXT A + B + C Kit
and
Software Package

ISTA / D and ISTA / P Two In One

 Standalone offline for ISIS Server

 For
ANY Desktop or Laptop 
 * Windows 7 *
*
Windows 8 *
* Windows 8.1 *
* Windows 10 * 

BMW / MINI / ROLLS ROYCE ALL MODEL
DIAGNOSTIC

PROGRAMMING CODING
 ( TIS ) WORKSHOP MANUAL
( WDS ) WIRING DIAGRAM
ALL SYSTEM  FULL PACKAGE

With

BMW RHEINGOLD ISTA / NATIVE System  ( 實體安裝 )

BMW NEXT ISTA / P System ( 中文版 / Multi Language )