HONDA / ACURA HDS and i-HDS

 HDS / i-HDS 是本田公司提供給其特約維修站

使用的專用檢測儀 , 功能強大 , 可讀取故障碼 , 資料流程 ,

清除故障碼 , 以及各控制單元匹配及編程。

 


 

1. HDS Functions Supported by for Honda / Acura Protocols

Reading and decoding fault codes from control blocks memory
Deleting fault codes
Displays system current parameters in digital form
Combined displaying of data
Management of executive devices
Logs keeping - writing and keeping of digital parameters in memory
Special functions - changing of permissible settings of blocks, programming etc.
HDS Cover All worldwide Market 

2. HDS Functions Supported by OBDII Protocols

Mode $01 - Displays system current parameters in digital form ( up to 8 parameters at once )
Mode $02 - Displays parameters of freeze frame
Mode $03 - Reading and decoding of fault codes from control block ? memory
Mode $04 - Deleting of fault codes ( memory clearing )
Mode $05 - Displays results of oxygen sensors
Mode $06 - Displays results of changeably controlled systems and components
Mode $07 - Displays results of constantly controlled systems and components
Mode $08 - Management of executive devices
Mode $09 - Displays car identification info

3. i-HDS Functions Supported by for Honda / Acura New Protocols

The i-HDS software suite is a new reprogramming application called J2534 Rewrite . This application is made available to all subscribers of the i-HDS software suite
and replaces the previous generation software , J2534 Honda Pass-thru Reprogramming Software .
 

This new application is compatible with generic VCIs that comply with SAE J2534 .
It must be used to reprogram any Honda/Acura vehicle equipped with ECUs
that support reprogramming .
Refer to the table below for legacy applicability for the programming of ECMs
and PCMs . Though system dependent , late-model vehicles may be equipped with other ECUs that support reprogramming as well , e.g. ABS or VSA. J2534 Rewrite must be used to reprogram these control modules , as instructed in an applicable service bulletin .
 

HONDA / ACURA HDS


 


 





 

HONDA / ACURA i-HDS

For

2017 UP New Models


 




 


 

Languages:

Both Honda
HDS / i-HDS are sharing the same languages , including : English , Portuguese , Spanish , French , Indonesian , Korean , Thai , Turkish , Japanese , Vietnamese and Chinese , which greatly promote popularity
for the comprehensive Honda enthusiasts around the world.

<<<  設有中文版選擇   >>>
 

Key Features of the Mongoose MFC PRO for Honda / Acura
 
bulletJ2534 and J2534-1 compliant device driver
bulletCommercial Range ( 0 to +70° C )
bulletDimensions: 3" x 1.75"
bulletOperating Voltage: Bus-powered by USB
bulletHost Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver
bulletLost cost, high performance pass-thru diagnostic tool for use with PC
bulletUSB Diagnostics tool for CAN and ISO9141 vehicles
bulletSupports reprogramming for Honda HDS / i-HDS
bulletSimple packaging with electronics contained inside the cable.
 
Bus Protocols supported by the Mongoose MFC PRO for Honda / Acura
 
bulletCAN Bus ( capable of ISO 15765 , GM LAN , J1939 , and ISO14229 )
bulletKWP2000 ( ISO9141 / ISO14230 )
bulletShort to Ground pins 1 , 9 and 15
bulletVPP +5 Pin 12

PACKAGE LIST:

1 x Genuine Original HONDA HDS i-HDS MFC PRO Diagnostic OBD II Cable USB

(
Our Diagnostic Cable Hardware is Original Order From U.S.A. HONDA Dealer )
(
Diagnostic Cable Hardware not made in China clone Error Products )  

1 x Software DVD ROM

HONDA HDS /
i-HDS is Full Cover Windows 7 SP1 64 Bit O.S.
  
( Main DIAGNOSTIC Software Can Install on any Laptop or Desktop )